Technical Program

WE-SP.1P: GAP Waveguide Technology for Millimeter Wave Antenna Design

Session Type: Special Session Oral
Time: Wednesday, July 11, 13:20 - 17:00
Location: Marina I
Session Chairs: Eva Rajo-Iglesias, University Carlos III of Madrid, Ahmed Kishk, Concordia University and Ashraf Uz Zaman, Chalmers University of Technology
 
13:20 - 13:40
WE-SP.1P.1: TEM H-PLANE HORN ANTENNA BASED ON TEM PRINTED GAP WAVEGUIDE CONFIGURATION
         Nima Bayat-Makou, Polytechnique Montréal - University of Montreal, Canada; Ahmed A. Kishk, Concordia University, Canada
 
13:40 - 14:00
WE-SP.1P.2: SINGLE-LAYER DUAL-BAND SUBARRAY FOR 20/30 GHZ USING GAP WAVEGUIDE TECHNOLOGY
         Miguel Ferrando-Rocher, Alejandro Valero-Nogueira, Jose Ignacio Herranz-Herruzo, Daniel Sánchez-Escuderos, Universitat Politècnica de València, Spain
 
14:00 - 14:20
WE-SP.1P.3: DESIGN OF A LOW OUTPUT-PHASE ERROR RIDGE-GAP COUPLER FOR ANTENNA ARRAYS APPLICATIONS
         Mohammadmahdi Farahani, Tayeb A. Denidni, Energy, Material, and Telecommunications, Canada; Mourad Nedil, Université du Québec en Abitibi-Témiscamingue, Canada
 
14:20 - 14:40
WE-SP.1P.4: GLIDE-SYMMETRIC HOLEY METALLIC STRUCTURES FOR COST-EFFECTIVE IMPLEMENTATIONS OF GAP WAVEGUIDE TECHNOLOGY
         Oscar Quevedo-Teruel, Mahsa Ebrahimpouri, Qingbi Liao, KTH Royal Institute of Technology, Sweden; Astrid Algaba-Brazález, Ericsson AB, Sweden; Adrian Tamayo-Dominguez, Polytechnic University of Madrid, Spain; José-Manuel Fernández-González, Universidad Politécnica de Madrid, Spain; Pablo Padilla, University of Granada, Spain; Zvonimir Sipus, University of Zagreb, Croatia (Hrvatska); Eva Rajo-Iglesias, University Carlos III of Madrid, Spain
 
14:40 - 15:00
WE-SP.1P.5: SIMPLE AND BROADBAND TRANSITION BETWEEN RECTANGULAR WAVEGUIDE AND GROOVE GAP WAVEGUIDE FOR MM-WAVE APPLICATIONS
         Abbas Vosoogh, Ashraf Uz Zaman, Jian Yang, Chalmers University of Technology, Sweden
 
15:00 - 15:20 Break
 
15:20 - 15:40
WE-SP.1P.6: E-BAND HIGH GAIN GAP WAVEGUIDE SLOT ARRAY ANTENNA WITH ETSI CLASS-III RADIATION PATTERN SUITABLE FOR MASS PRODUCTION
         Abolfazl Haddadi, Esperanza Alfonso, Carlo Bencivenni, Thomas Emanuelsson, Gapwaves AB, Sweden
 
15:40 - 16:00
WE-SP.1P.7: DESIGN OF PLANAR ARRAYS WITH GROOVE GAP WAVEGUIDE TECHNOLOGY IMPLEMENTED WITH GLIDE-SYMMETRIC HOLEY STRUCTURES
         Eva Rajo-Iglesias, University Carlos III of Madrid, Spain; Astrid Algaba-Brazález, Ericsson AB, Sweden; Qingbi Liao, Oscar Quevedo-Teruel, KTH Royal Institute of Technology, Sweden
 
16:00 - 16:20
WE-SP.1P.8: SPACE MAPPING DESIGN OF GAP WAVEGUIDE FILTERS
         Dirk De Villiers, Clifford Sibanda, Stellenbosch University, South Africa
 
16:20 - 16:40
WE-SP.1P.9: MILLIMETER-WAVE COMPONENTS BASED ON GAP WAVEGUIDE USING ADDITIVE MANUFACTURING
         Adrián Tamayo-Domínguez, José-Manuel Fernández-González, Manuel Sierra-Castañer, Universidad Politécnica de Madrid, Spain
 
16:40 - 17:00
WE-SP.1P.10: INVESTIGATION ON BALANCED DOUBLE-SIDED GAP WAVEGUIDE FOR W-BAND APPLICATIONS
         Hao Wang, Yu Quan, Yan Wang, Jianyin Cao, Nanjing University of Science and Technology, China; Shuang Liu, University of Electronic Science and Technology of China, China